Gearbox scroll-seal.

(?some S2 and S2A only?)
Date: Thu, 3 Nov 94 09:39:25 -0800
From: "TeriAnn Wakeman"  (twakeman@apple.com)
Subject: Tip from Scotty
I was chatting with Scotty over the phone yesterday evening and he passed me a tip and asked that I forward it to the group.

Back in the days when he ran a Land Rover authorized warrenty repair shop, he recieved a bulletin from Land Rover saying not to park Land Rovers facing down a steep hill.

The primary input shaft on the front of the transmission does not have a regular oil seal. It instead has scrolling that activly pushes the oil back into the gear box when the Land Rover is tilted downward enough that the transmission oil level reaches the input shaft. This works well when the Land Rover is moving but does not work when the car is parked.

Transmission oil will flow down along the shaft and go onto the clutch disk. Left facing a steep downhill long enough, the clutch can start slipping. The heat of the clutch will dry the oil and create a glaze that causes clutch jidder.

He mentioned that a few clutch disks were replaced on warrantee because people parked regularly facing down hill on some of the San Francisco hills.

I believe he said that the problem occures when the slope gets to be about 25 or 30 degrees, so a slight downhill slope is OK.

If you park on a steep slope always aim the nose of your Land Rover uphill.

TeriAnn Wakeman        Large format photographers look at the world
twakeman@apple.com     upside down and backwards
LINK: TWAKEMAN
408-974-2344                         TR3A - TS75519L,
                       MGBGT - GHD4U149572G, Land Rover 109 - 164000561